 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 66095 MINIATURE LCC OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION Features: * * * * Electrically similar to 4N47, 4N48, or 4N49 Standard and screened versions available Hermetically sealed 4 pin LCC High-voltage electrical isolation...1kV rating * * * * Applications: High density surface mount circuits Ground loop isolation Feedback controls General purpose switching circuits DESCRIPTION The 66095 series optocouplers consist of an infrared LED and a silicon phototransistor in a 4 pin hermetically sealed leadless chip carrier. The 66095 is electrically similar to the 4N47, 4N48, or 4N49 series optocouplers, and is available in standard and screened versions. The 66095 miniature LCC is ideal for surface mount applications where board space is limited. ABSOLUTE MAXIMUM RATINGS Input-to-Output Voltage...................................................................................................................................................... 1 KV Collector-Emitter Voltage .......................................................................................................................................................40 V (This value applies with the input-diode current equal to zero) Input Diode Reverse Voltage ...................................................................................................................................................2 V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature ........................................................40 mA (Derate linearly to 125C free-air temperature at the rate of 0.67 mA/C) Continuous Collector Current.............................................................................................................................................50 mA Peak Diode Current.....(This Value applies for tw < 1s, PRR < 300 pps) ..............................................................................1A Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature .................................................... 300mW (Derate linearly to 125C free-air temperature at the rate of 3 mW/C) Operating and Storage Free-Air Temperature Range....................................................................................... -55C to +125C Lead Temperature 1.6mm (1/16 inch) from Case for 10 seconds ..................................................................................... 245C Package Dimensions 0.225 [5.72] 0.215 [5.46] Schematic Diagram 0.075 [1.91] 0.061 [1.55] 0.155 [1.40] 0.145 [3.68] PIN 1 IDENTIFIER 3 A C 1 0.028 [0.17] 0.022 [0.56] 1 4 2 3 0.088 [2.24] 0.072 [1.83] 0.048 [1.22] 3 PL 0.032 [0.81] 0.055 [1.40] 0.045 [1.14] 2 K E 4 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut Str., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66095 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. MINATURE LCC OPTOCOUPLER, Continued PARAMETER Input Diode Static Reverse Current Input Diode Static Forward Voltage -55C +25C +100C SYMBOL IR VF MIN TYP MAX 100 UNITS A V V V TEST CONDITIONS VR = 2V NOTE 1.3 1.3 1.3 1.5 1.5 1.5 1.7 1.7 1.7 IF = 10mA OUTPUT TRANSISTOR TA = 25C unless otherwise specified. Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1mA, IF = 0 COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. On State Collector Current Ta = +25C On State Collector Current Ta = -55C On State Collector Current Ta = +100C Off State Collector Current Off State Collector Current, Ta = 100C Collector-Emitter Saturation Voltage -X01 -X02 -X03 Input to Output Resistance Input to Output Capacitance Rise Time (Phototransistor Operation) or -XX1 -XX2 -XX1 -XX2 -XX3 -XX1 -XX2 -XX3 -XX1 -XX2 -XX3 IC(OFF) IC(OFF) VCE(SAT) VCE(SAT) VCE(SAT) RIO CIO tr or 10 11 0.5 IC(ON) 1 2 0.7 IC(ON) 1.4 2.8 0.5 IC(ON) 1.0 2.0 5 10 mA VCE = 5V, IF = 2mA mA VCE = 5V, IF = 1mA mA 100 100 0.3 0.3 0.3 nA A VCE = 5V, IF = 2mA VCE = 20V, IF = 0mA VCE = 20V, IF = 0mA IF = 2mA, IC = 0.5mA IF = 2mA, IC = 1mA IF = 2mA, IC = 2mA VIN-OUT = 1kV F = 1MHz, VIN-OUT = 0 2 V V V 1 1 2.5 10 10 5 20 25 pF s VCC = 10V, IC = 5mA, Fall Time -XX3 10 25 tf RL = 100 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques. tw = 100 s, duty cycle 1%. RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature SYMBOL IFL IFH VCC TA MIN 0 1 5.0 -55 MAX 100 2 20 125 UNITS A mA V C MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut Str., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM |
Price & Availability of 66095-XX1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |